stock suspension ?s

Type-R Discussion - Discuss general ITR/CTR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Post Reply
User avatar
white rocket
Posts: 135
Joined: Mon Aug 14, 2017 5:55 pm

Re: stock suspension ?s

Post by white rocket » Thu Aug 24, 2017 11:50 am

Yeah, it's really only the springs and top hats that are of interest. Most will just get Koni yellows anyway. Used shocks are a dice roll at best.
"The bitterness of poor quality remains long after the sweetness of low price is forgotten"
Top
Dave7CDMTYPER
Posts: 1079
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: stock suspension ?s

Post by Dave7CDMTYPER » Thu Aug 24, 2017 5:04 pm

white rocket wrote: ↑Thu Aug 24, 2017 11:50 am Yeah, it's really only the springs and top hats that are of interest. Most will just get Koni yellows anyway. Used shocks are a dice roll at best.
Good to know. I should def do something like this in the future.
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.
Top
User avatar
white rocket
Posts: 135
Joined: Mon Aug 14, 2017 5:55 pm

Re: stock suspension ?s

Post by white rocket » Thu Aug 24, 2017 5:37 pm

Dave7CDMTYPER wrote: ↑Thu Aug 24, 2017 5:04 pmGood to know. I should def do something like this in the future.
You have the means since you have OEM JDM suspension. Get Koni yellows and swap the springs and top hats over. Maybe even replace some bushings while you are in there if they are worn. You can lower the overall ride height by about 10mm IIRC by using the lower perch on the shock. Bam! stock suspension with similar ride height, completely compliant, and with dampening adjustability. Honestly my favorite set-up on any ITR.
"The bitterness of poor quality remains long after the sweetness of low price is forgotten"
Top
Dave7CDMTYPER
Posts: 1079
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: stock suspension ?s

Post by Dave7CDMTYPER » Thu Aug 24, 2017 7:49 pm

white rocket wrote: ↑Thu Aug 24, 2017 5:37 pm
Dave7CDMTYPER wrote: ↑Thu Aug 24, 2017 5:04 pmGood to know. I should def do something like this in the future.
You have the means since you have OEM JDM suspension. Get Koni yellows and swap the springs and top hats over. Maybe even replace some bushings while you are in there if they are worn. You can lower the overall ride height by about 10mm IIRC by using the lower perch on the shock. Bam! stock suspension with similar ride height, completely compliant, and with dampening adjustability. Honestly my favorite set-up on any ITR.
Sounds good to me. So are you saying the ride height would be the same as oem, but also can be adjustable? I need it to be oem height, my garage clearance is pretty close already.
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.
Top
User avatar
white rocket
Posts: 135
Joined: Mon Aug 14, 2017 5:55 pm

Re: stock suspension ?s

Post by white rocket » Fri Aug 25, 2017 11:21 am

Dave7CDMTYPER wrote: ↑Thu Aug 24, 2017 7:49 pmSounds good to me. So are you saying the ride height would be the same as oem, but also can be adjustable? I need it to be oem height, my garage clearance is pretty close already.
There are different perches where the springs can sit. Pretty sure it has a position that is the same as stock height.
"The bitterness of poor quality remains long after the sweetness of low price is forgotten"
Top
Dave7CDMTYPER
Posts: 1079
Joined: Tue Aug 15, 2017 2:17 am
Location: US
Badge Number: 01-1322

Re: stock suspension ?s

Post by Dave7CDMTYPER » Fri Aug 25, 2017 1:56 pm

white rocket wrote: ↑Fri Aug 25, 2017 11:21 am
Dave7CDMTYPER wrote: ↑Thu Aug 24, 2017 7:49 pmSounds good to me. So are you saying the ride height would be the same as oem, but also can be adjustable? I need it to be oem height, my garage clearance is pretty close already.
There are different perches where the springs can sit. Pretty sure it has a position that is the same as stock height.
Great news! I'm excited.
ITR CDM 01-1322
2001 GS-R
I have badge #00-1259 in hand.
Top
Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests