ITR 00-0874 ... Life after death

[coolhandluke]

...Oh no man, I hope they survived the journey. It's definitely a hard find...

I didn't bring them with me. I blame itr1334 for distracting me with all his car projects.

I recently found a set local, I'm hoping they are in decent condition.

[JDMJNKY]

hahaha #mistakesweremade

fingers crossed that they are legit!

[AndyD]

Hoping to see some updates!

[JDMJNKY]

Soon soon.... My world has been busy!

[JDMJNKY]

Here are some long overdue updates on the R. I've been playing with my subarus way too much and have clearly lost sight of the R for a bit, but everything happens in its own time.

Got the gas tank installed, hunted down newer straps, valve, and covers. 98-01 GSR valve as well as their covers are the same.













after hunting down LCAs w/ ABS sensors, I installed some HR/Roca T/A bushings, painted them up and got the spoon rear shocks installed.







Next was sorting the T/A's themselves


oem "BBK" + CSR rotor



moving in sections, the task was sorting the heat-shields, visually I couldn't leave them untouched









getting closer to the starting line, I had a choice to make, stock exhaust, or one of my all time favs. Win win IMO.



realizing I was missing a RSB somewhere in the timeline, (I'm also after the USDM Trunk brace/bar. NOT STRUT BAR, and rear LOWER Tie Bar if anyone has them for sale.) Thankfully it didn't set me back much.


after


waited a long time for this special order of bushings and end links to arrive.









Todays shenanigans will end the updates. Installed the trans brace and shift linkage.

[aw614]

I saw your classified post about the trunk brace, did not realize the JDM brace was longer, curious to know which one I bought a few years ago to put on my LS...

Were there no issues with pressing out and pressing in the new bushings on the ITR LCAs? I got the impression that most people seemed to avoid that job and bought new LCAs instead (problem know with them being discontinued...)

[JDMJNKY]

Yeah I thought I had one but it turns out, I have the jdm one. A friend of mine was building his integra rep, and the bar I helped him put on fit in the holes of the rear panel template. Trying to find the shorter bar has eluded me.

as for the rear LCAs it was a PITA. I trashed a jdm set getting it right. Even then it's no fun.

[JDMJNKY]

back on all 4's


"Cash Me Ousside / How Bow Dah" Homie Miguel giving it a rinse.

[Stin1]

Yeah I thought I had one but it turns out, I have the jdm one. A friend of mine was building his integra rep, and the bar I helped him put on fit in the holes of the rear panel template. Trying to find the shorter bar has eluded me.

as for the rear LCAs it was a PITA. I trashed a jdm set getting it right. Even then it's no fun.

I am thinking maybe you have a four door version? I cross referenced the 98 - 00 as the same rear bar for us in the states. I didn’t check the 01 part number. The Amaya website has a part number one digit off . You don’t have the option to select the doors when searching.

16DB3963-CDE5-4D15-A2DD-2C652BD4AA40.png (528.82 KiB) Viewed 1649 times

615A824E-03B4-4943-86E0-A5C2FCF16832.png (398.8 KiB) Viewed 1649 times

AF95F489-2612-45E9-8582-97C412F72E93.png (819.75 KiB) Viewed 1649 times

615A824E-03B4-4943-86E0-A5C2FCF16832.png (398.8 KiB) Viewed 1649 times

16DB3963-CDE5-4D15-A2DD-2C652BD4AA40.png (528.82 KiB) Viewed 1649 times

[JDMJNKY]

I’ve been putting off buying a bar just because. I may just be bugging out we will see. I reached out to my buddy that we helped and asked him for some pics. So I should have an answer here soon.