98r restoration questions

[Vtecwreck]

Hi, I’m currently putting my caR back together and have a few questions. I figured I’d make a thread here and update it as I go in hopes it could potentially be useful for others.

Evap question + harness clips

I’ve noticed that my canister has a provision for a hose on the back. However, I do not have a hose that would go attached there. Can anyone confirm if there actually is a hose that goes here, maybe from the intake?

86E81F9F-1434-4E0E-AA11-4AB072021791.jpeg (3.09 MiB) Viewed 1601 times

Secondly, I’m sure anyone doing a Honda restoration has come across this problem; harness clips. Does anyone happen to know where we can find them, Honda has long discontinued them. I do remember seeing someone list them on a fb page but they were gatekeeping the vendor. Oem grade would be ideal but something similar would work too!

38A3BBF6-2561-4F9A-ABD2-9C919304A313.jpeg (2.42 MiB) Viewed 1601 times

[navin]

The clips aren't discontinued. .

https://www.acuraautomotiveparts.org/v- ... ss-clamp-2

[oddomatik]

I’ve noticed that my canister has a provision for a hose on the back. However, I do not have a hose that would go attached there. Can anyone confirm if there actually is a hose that goes here, maybe from the intake?

As far as I know, my '98 USDM EVAP system is untouched, and it has the same unused hose provision. I can't solve any mysteries as to what it's for, but I don't think it's used.

Here it is on parts diagrams if it can help.

[oddomatik]

ure anyone doing a Honda restoration has come across this problem; harness clips. Does anyone happen to know where we can find them, Honda has long discontinued them. I do remember seeing someone list them on a fb page but they were gatekeeping the vendor. Oem grade would be ideal but something similar would work too!

91558-ST5-003 for both USDM and JDM - You'll find those pieces in the "Engine Wiring Harness" section as @navin pointed out. You can find aftermarket replacements on eBay (can't vouch for these though)

[Vtecwreck]

The clips aren't discontinued. .

https://www.acuraautomotiveparts.org/v- ... ss-clamp-2

You’re right, thanks!

As far as I know, my '98 USDM EVAP system is untouched, and it has the same unused hose provision. I can't solve any mysteries as to what it's for, but I don't think it's used.

Here it is on parts diagrams if it can help.

Great, I’ve been referencing BAT listings but none have pictures of the Evap Canister. Thank you!

91558-ST5-003 for both USDM and JDM - You'll find those pieces in the "Engine Wiring Harness" section as @navin pointed out. You can find aftermarket replacements on eBay (can't vouch for these though)

Thank you! The aftermarket clips are not to my liking. I do have a few spare harnesses that I may take the clips from if I can find any that are not discolored. Otherwise I’ll put an order in.