Page 8 of 11

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Fri Jun 02, 2023 11:54 am
by Dc2-ProductionS
Spark Plugs and Oil Change - :thumbup:
CKF Bypass - :thumbup:
Radiator - :thumbup: (Still need to fully tighten down and affix)
Rear Brake lines, brake pads, rotors, calipers - :thumbup:
New hardware for all of above - :thumbup: (Few stragglers on the way still...)
Driver & Pass Windows sorted - :thumbup: (Just need to fix/mount the tracks)
E-Brake cables Sourced and installed... partially :lol: - :thumbup: (Forgot the whole exhaust has to come down and go above heat shields.... :oops: )


After all this was buttoned up..... IT WAS TIME TO DRIVE BABY!!

We threw in a single headlight at 1am and cruised heR down to the local wash.... :D :D :D

Image
Image
Image
Image
Image
Image


Power steering lines on the way...
E brake lines to be closed up
evap canister on the way
time to start driving around and knocking out all the little noises and creaks and bangs. LOL :lol: :lol:

Stay tuned!
Dc2

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Fri Jun 02, 2023 10:38 pm
by JDMJNKY
Dc2-ProductionS wrote: Fri Jun 02, 2023 11:54 am
time to start driving around and knocking out all the little noises and creaks and bangs. LOL :lol: :lol:

Stay tuned!
Dc2
Sounds like the maiden voyages I take haha, congrats man on getting to enjoy this thing!!!

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Sat Jun 03, 2023 4:17 pm
by coolhandluke
JDMJNKY wrote: Fri Jun 02, 2023 10:38 pm
Dc2-ProductionS wrote: Fri Jun 02, 2023 11:54 am
time to start driving around and knocking out all the little noises and creaks and bangs. LOL :lol: :lol:

Stay tuned!
Dc2
Sounds like the maiden voyages I take haha, congrats man on getting to enjoy this thing!!!
Nothing like that first drive after a long rebuild. I can still visualize mine in ~'08 for #981040. Way to go!

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Wed Jun 21, 2023 10:57 am
by Dc2-ProductionS
Well I have logged an uninsured, non registered 15 miles trying to sort out all the little bangs and clanks and thumps... And I think we are pretty close to set!!

Image

Interior is pretty much buttoned back up and back to OEM.

Image

Optional sides and rear valances installed. Really finishes it out.

Image

I think I have a lead on some rear ABS sensors to finish up this beautiful underside from the back!!All new bolts lookin goooooood! :D :D

Image


Headed to the DMV on Friday to register it and put it on the road, alignment on Tuesday, and then we move into the last phase of this build. 8-) 8-)

Stay tuned.
Dc2

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Thu Jun 22, 2023 6:33 am
by ph8ed4life
Dc2-ProductionS wrote: Wed Jun 21, 2023 10:57 am Well I have logged an uninsured, non registered 15 miles trying to sort out all the little bangs and clanks and thumps... And I think we are pretty close to set!!
Man, that's exciting! I did the same in November with mine and it was fantastic...besides thinking it was going to catch on fire a few miles in, it was a perfect drive 8-)

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Thu Jun 22, 2023 5:21 pm
by JDMJNKY
HAHA mad twining I leave my ecu out until it's a go too!! Congrats on the voyage.

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Mon Jun 26, 2023 10:35 am
by Dc2-ProductionS
Image
Image
Image

Another 15 miles down, this time legally. LOL. Some fresh gas to get the tank filled up, and a bunch of crossover pulls to wake this ol' giRl back up!!

She needs an alignment bad. LOL :lol: :lol: :lol: she's pulling against herself at all 4 tires it feels like. But she goes in tomorrow to get that taken care of. After that, we tackle a bunch of smalls on the list before she goes back on the operating table. ;) :mrgreen:

Stay tuned
Dc2

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Mon Jun 26, 2023 3:47 pm
by JDMJNKY
Sweet Victory!! Smashing with no alignment sure feels sketchy doesn't it? lol

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Mon Jun 26, 2023 11:17 pm
by Stin1
What ecu are you running? Looks like the later small box.

Re: #98-1046 : Minnesota Barn Find & Resurrection

Posted: Tue Jun 27, 2023 8:58 am
by Dc2-ProductionS
JDMJNKY wrote: Mon Jun 26, 2023 3:47 pmSweet Victory!! Smashing with no alignment sure feels sketchy doesn't it? lol
Yuh. Could feel it a lot on decel. Excited to see how she feels after!
Stin1 wrote: Mon Jun 26, 2023 11:17 pmWhat ecu are you running? Looks like the later small box.


This is actually a '97 USDM ECU. Must just be the angle in picture?