OEM shift boot (black) 2001 CDM
Re: OEM shift boot (black) 2001 CDM
the part number tour posted is standard in all other models besides the R
-
- Posts: 346
- Joined: Thu Aug 17, 2017 11:34 pm
Re: OEM shift boot (black) 2001 CDM
That's confusing lol
So the SR3 part # works on other Integras and EG Civics but it is missing the chrome ring?
My parts guy said the 2001 CDM shift boot is discontinued in Canada so that is a shame.
From what I gather all 97 - 01 ITR shift boots for CDM / USDM are NLA?
Ugh. I thought the MKIV Supra was bad for discontinued parts but ITR is going down the same path.
So the SR3 part # works on other Integras and EG Civics but it is missing the chrome ring?
My parts guy said the 2001 CDM shift boot is discontinued in Canada so that is a shame.
From what I gather all 97 - 01 ITR shift boots for CDM / USDM are NLA?
Ugh. I thought the MKIV Supra was bad for discontinued parts but ITR is going down the same path.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
- boostjunkie33
- Posts: 94
- Joined: Mon Aug 14, 2017 10:35 am
- Location: 6ix
Re: OEM shift boot (black) 2001 CDM
CDM yes, 00-01 US used the SR3 if I'm correct. I forget sometimes these cars are 20 years old. At least they're hella more reliable than any of my old german iron.touringteg wrote: ↑Tue Feb 27, 2018 12:48 pm That's confusing lol
So the SR3 part # works on other Integras and EG Civics but it is missing the chrome ring?
My parts guy said the 2001 CDM shift boot is discontinued in Canada so that is a shame.
From what I gather all 97 - 01 ITR shift boots for CDM / USDM are NLA?
Ugh. I thought the MKIV Supra was bad for discontinued parts but ITR is going down the same path.
DD-'23 S3
'93 Miata
'90 CRX SI
'01-1212
'93 Miata
'90 CRX SI
'01-1212
Re: OEM shift boot (black) 2001 CDM
The 00-01 as well as the jdm have a regular black ring that is too small to clip on the shifter. The em1 boot has the right chrome ring but lacks the stitching.
Re: OEM shift boot (black) 2001 CDM
Some of you may have heard this . " its to big to fit" .
-
- Posts: 346
- Joined: Thu Aug 17, 2017 11:34 pm
Re: OEM shift boot (black) 2001 CDM
^ Just to confirm JDM had red stich and CDM/USDM are all black?
Just double checked my 2001 CDM and it has the chrome ring. It is in good condition but the boot tents to pull down off the ring on side facing the rear of the car. I am always pulling it up but it doesn't stay put.
Just double checked my 2001 CDM and it has the chrome ring. It is in good condition but the boot tents to pull down off the ring on side facing the rear of the car. I am always pulling it up but it doesn't stay put.
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
- boostjunkie33
- Posts: 94
- Joined: Mon Aug 14, 2017 10:35 am
- Location: 6ix
Re: OEM shift boot (black) 2001 CDM
the boot for 00-01 model usdm type R is available still. but as stin pointed out the 97-98 shift knob will not fit into the 00-01 shift boot
Re: OEM shift boot (black) 2001 CDM
this guy did something. I think if I could switch the ring to the jdm boot it would also be to short and tug off in fifth. Not sure what he has spotted it at ifo two years ago.
-
- Posts: 346
- Joined: Thu Aug 17, 2017 11:34 pm
Re: OEM shift boot (black) 2001 CDM
Dc231 if 00 to 01 is available with the chrome ring do you know the part #?
CW ITR 01-1233 CDM Sold
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
CW ITR 98-0635 CDM
CW CTR 17-01818 CDM
Who is online
Users browsing this forum: No registered users and 1 guest