#98-1046 : Minnesota Barn Find & Resurrection

[Dc2-ProductionS]

JDM-R motor torn out with EXACTLY 3,000 miles of use in this caR and one year EXACTLY to the day it was installed.

4/7/23 - Motor installed
4/7/24 - Motor removed @ exactly 3,000 miles on the dot. This is the 5th car Ive had this JDM motor in, and she has served me EXTREMELY well in every one. This motor stays with me forever.




And we have been working on the new heaRt going in. Here is build spec as of today.

B18C5 Block
81.5mm Bore
GSR Zero Balanced & Micro Polished Crank
SCAT H-Beam Rods
Nippon Free Floating Flat Top 81.5mm Turbo Pistons
Speedfactory Headgasket
Golden Eagle Oil Squirter Plugs
ARP Headstuds
Supertech 100 Series Black Valves
Supertech Valve Seals
Toda Dual Valve Springs & Retainers
Toda Cam Gears
Stock ITR Cams
ID 1050x Injectors





Some may notice the recirculated wastegate. I want all the turbo and motor noises, none of the exhaust leak sound

Tuning appointment is in 10 days! Time for the final push! We got a lot of sh!t to do!

Stay Tuned
Dc2

[Dc2-ProductionS]

Well...... We survived!!







Our goal was to be 400+, but we have a few things limiting us. The log manifold is hurting us, and then the recirculated pipe is a bit too high to flow properly. The return tube should be further down by the flex pipe/o2 sensor. This would help with back pressure and flow. HOWEVER, she was nice and smooth and made decent power. For going around the track, 300+ is going to be plenty.



We made 312 / 220 with the tune able to run a track course for 20-30 mins if I can keep cooling down. Not too much pushing on it, but enough to power to have some fun. Got heR back home and got the front splitter back on and some other things tightened up. She's good to go for some pulls and fun out on the road. 3rd feels like a monster. I gotta get used to this!!




Stay tuned!
Dc2

[JDMJNKY]

The engine story trips me out. You'd rather blow up a usdm C5? But fun is fun, and its still one hell of a build log