Type R Club of America

I called Honda Customer Service again today after the local dealership asked if there were any warning lights (I said, "No.") and wanted $95 to run a diagnostic for the high coolant temperature. They were clear that it wouldn't be covered under warranty. The Honda CSR recommended that I h...

From Eibach

Spring Rates OEM vs Eibach Pro-kit
Front OE= 263lb/in
Front Eibach= 291lbs/in

Rear are progressive
Rear OE= 246lb/in
Rear Eibach= 274lb/in

Can you feel if stability control is still on even when it says "off"? Yes. Off isn't off. There is a procedure to actually turn it off, but the rear brake issue prevented me from trying it. Process: 1. Turn car on. 2. Turn off the parking brake 3. Press and hold the brake pedal 4. Turn t...

I’m guessing rear inside brakes are applied automatically to help the car rotate.

Maybe running with traction off will disable it.

Front camber can be adjusted from the factory.

I was able to get -1.6 (driver) and -1.9 (passenger) at the front.

http://www.civicx.com/threads/factory-a ... ons.15163/

I went for an alignment yesterday.

-1.6 and -1.9 front. Not bad being 100% factory.

I'm guessing there's some slop at the knuckle to bring the 1.6 to 1.9. I think I'm happy with this until I have to replace the OEM tires. Then I'll look into loosening all the bolts to max out the bolt slop.

Really have no use for these pads since I sold the ITR. Someone want to make a reasonable offer?

Hawk HT-10 front pads used for one track event. Still has a lot of padding left.

Hawk HPS rear pads are brand new.

$100 shipped for the fronts
$30 shipped for the rears

Pics:
https://imgur.com/a/PUdgZ

Please text me at 612-888-7137 if you're interested, thanks!

Picked mine up on 9/1/2017. Still breaking her in.

Here are the factory alignment procedures and specifications if anyone is interested.

http://www.civicx.com/threads/factory-a ... ons.15163/

Did yours have the guide pins already removed? Went back and looked again, guide pin is still in place. Edit: Am about to swap on my tack rims/tires ... lugnuts are 7/8" - 21mm, studs are 14 (for sure) x 1.25 (I think). What's the torque spec for the lug nuts (80-85 as ususal)? Never mind, sto...