Type R Club of America

I took a drive up Angeles Crest, it was closed at RedBox. It was still a fantastic drive, the car now behaves better than it ever has for me. Got some nice shots too.

Pothole killed one of the black wheels so bronze entered the chat

Washed

As long as I’m here thought I’d drop a few recent shots GVBC (Angeles Crest) https://i.ibb.co/YQSmcgg/IMG-9959.jpg https://i.ibb.co/mzLFVWr/IMG-9963.jpg Diffuser installed https://i.ibb.co/hYdrG2h/IMG-9942.jpg Custom header https://i.ibb.co/PDc6CPZ/72739640208-A6-F277-D9-91-ED-4-DE7-AED9-2881-F65-BD...

Takeaway: The OEM p73 ecu reads Throttle Position Sensor voltage from .5V Idle to 4.5V WOT. However if you’re using an OBD2 reader you’ll see absolute throttle position based on 0-5v. So you should read something like 10% as 0, and 90% as 100%. Yet some the ecu isn’t happy much above 8% more than th...

I’ve had a some of Hardrace (street) bushings in for awhile. (Front lower arms, rear toe) Seem fine for me (hpde, to/from track). No apparent break down that I’ve detected. Comfortable on the street, plenty with 650/600 springs and Eibach dampers cranked down on the track. I switched front torque(is...

Most of the braking is done up front and from what I recall, the Spoon twinblock was design to retain the same pedal ratio as the stock calipers. I know when I installed them, the pedal feel is similar. Probably worth it’s own discussion but to share here: Something that’s taken me awhile to adjust...

Honda Vintage Culture introduced an Integra generations Tee at the Long Beach Gran Prix. I tried to get one then but there was a staining flaw on all the shirts within reasonable sizing. As soon as I saw they had released these for sale on their site I placed an order along with the new Acura hoodie...

My 15x8 +32 TE37SL clear Mugen (s2k) calipers. Which is amazing since typically require 16” wheels. I don’t have spoon twin or mono blocks to check but should clear either. I’m running about 3deg camber front and back and have fenders trimmed/rolled to fit 225 rubber. Fit is flush+ not what I’d run ...

Damn I am considering buying this exhaust due to the reviews I've heard about along with the stock like appearance Was it too loud for you even with a catalytic converter? It is classy/stock looking but yes it’s loud to me, tastes vary though. I do run a high flow cat(gesi), so I expect the setup i...

coolhandluke wrote: ↑Wed Jun 22, 2022 10:57 am I'll throw my name into the hat to assist with rebuilding.

I’m going to mark this claimed then.